Istanbul Leather Organized Industrial Zone, Tuşe Sokak No: 6 Tuzla / Istanbul
Mon - Fri: 08:30 - 18:30
Helisfan
YK · TK TYPE AXIAL

Axial Fans

Axial fans are used in applications requiring high airflow relative to low pressure, such as general ventilation, fresh air supply, and fire pressurization.

Flow Rate
300 - 500.000 m³/h
Pressure
50 - 2.000 Pa
Diameter
Ø 250 - 1.600 mm
Drive
Belt-pulley, direct coupled
View Models
Axial Fans
Axial Fans
Axial Fans
Axial Fans
Axial Fans
ABOUT THE PRODUCT

What is an Axial Fan and Where is it Used?

Axial fans direct the air parallel to the fan shaft. They are the preferred fans for applications requiring low pressure relative to high flow rate: general ventilation, fresh air supply and fire pressurization are the main application areas.

Helisfan axial fans are manufactured at our factory in Istanbul Leather OIZ (Tuzla) 300 - 500.000 m³/h within flow rate and 50 - 2.000 Pa pressure ranges. The casing is flanged; it is bolted to the duct, wall, or a frame.

YK and TK types

Two casing types are available in the E-Catalog. In the YK type, the casing is short (L 200 - 500 mm) and the motor remains outside the casing. In the TK type, the casing is long (L 400 - 900 mm) and encloses the motor. Both types are available in 17 sizes; nominal diameter (D1) ranges from Ø 250 mm to Ø 1,600 mm.

Material and drive

The casing can be manufactured from ST 37, stainless steel, Hardox, or PVC; the rotor can be manufactured from aluminum or PVC. Belt-driven and direct-coupled drive options are available. You can contact us for dimension and capacity requirements outside of the dimensions listed in the catalog.

E-CATALOG DRAWINGS

YK and TK Type Dimensional Drawings

The letter dimensions in the model table correspond to these drawings. All dimensions are given in mm.

YK TYPE · 17 MODELS

Short casing, motor outside

Casing length L 200 - 500 mm. The motor remains at the back of the casing, outside.

YK type axial fan front and side view dimensional drawing: D1, D2, D3, B, L, T
TK TYPE · 17 MODELS

Long casing, motor inside

Casing length L 400 - 900 mm. The motor remains inside the casing.

TK type axial fan front and side view dimensional drawing: D1, D2, D3, B, L, T
E-CATALOG MODEL TABLE

Axial Fans Models

Values are from the Helisfan E-Catalog; dimensions are in mm. You can request a quote directly from the row of the model that suits your needs.
Model Code D1Nominal diameter D2Flange outer diameter D3Bolt circle BHole × quantity LHousing length TFlange thickness Quote
YK Type
YK 25 250 330 295 Ø10x8 200 2
YK 28 280 360 320 Ø10x8 200 2
YK 31 315 395 356 Ø10x8 200 2
YK 35 355 495 395 Ø10x8 200 2
YK 40 400 480 450 Ø12x8 220 2
YK 45 450 530 500 Ø12x8 220 2
YK 50 500 580 550 Ø12x12 250 2
YK 56 560 640 620 Ø12x12 250 2
YK 63 630 710 680 Ø12x12 310 2,5
YK 71 710 790 760 Ø12x12 310 2,5
YK 80 800 900 870 Ø14x16 310 2,5
YK 90 900 1000 970 Ø14x16 310 2,5
YK 100 1000 1100 1070 Ø14x16 400 3
YK 112 1120 1220 1190 Ø16x24 400 3
YK 125 1250 1350 1320 Ø16x24 400 3
YK 140 1400 1500 1470 Ø16x24 500 4
YK 160 1600 1700 1670 Ø16x24 500 4
TK Type
TK 25 250 330 295 Ø10x8 400 2
TK 28 280 360 320 Ø10x8 400 2
TK 31 315 395 356 Ø10x8 400 2
TK 35 355 495 395 Ø10x8 400 2
TK 40 400 480 450 Ø12x8 500 2
TK 45 450 530 500 Ø12x8 500 2
TK 50 500 580 550 Ø12x12 500 2
TK 56 560 640 620 Ø12x12 650 2
TK 63 630 710 680 Ø12x12 650 2,5
TK 71 710 790 760 Ø12x12 650 2,5
TK 80 800 900 870 Ø14x16 650 2,5
TK 90 900 1000 970 Ø14x16 800 2,5
TK 100 1000 1100 1070 Ø14x16 800 3
TK 112 1120 1220 1190 Ø16x24 900 3
TK 125 1250 1350 1320 Ø16x24 900 3
TK 140 1400 1500 1470 Ø16x24 900 4
TK 160 1600 1700 1670 Ø16x24 900 4

Technical datasheet (PDF) →

FREQUENTLY ASKED QUESTIONS

Questions About Axial Fans

The diameter and flange dimensions of both types are identical. In the YK type, the casing is short (L 200 - 500 mm) and the motor is outside the casing; in the TK type, the casing is long (L 400 - 900 mm) and the motor is inside the casing.

They are manufactured in a flow rate range of 300 - 500,000 m³/h and a pressure range of 50 - 2,000 Pa. Centrifugal blowers are preferred for applications requiring high pressure, long ducts, and filtration lines.

The casing can be made of ST 37, stainless steel, Hardox, or PVC; the impeller can be made of aluminum or PVC.

Yes. For your requirements with different dimensions and capacities, provide us with the flow rate, pressure, and installation details, and together we will determine the right solution for you.

QUICK FACTORY QUOTE

Let us help you choose the right fan for your project

Send us your flow rate, pressure, and ambient conditions; our engineers will provide the suitable model and factory price shortly.

WhatsApp Call Now