Technical & Engineering Guide
Axial fans direct airflow parallel to the fan shaft and are ideal for providing high airflow (m³/h) at low pressure (general room/building ventilation, car parks, fire smoke). Centrifugal fans draw air from the center and discharge it at a 90° angle, generating high static pressure (Pa); centrifugal fans should be preferred for long duct lines, filtration systems, and dust transport.
The required airflow is calculated by multiplying the facility volume (m³) by the hourly air change rate appropriate for the space's intended use (typically 6 to 30 times per hour). Pressure is determined by calculating resistances from elbows, grilles, and filters in the ductwork. To perform these calculations, you can filter your parameters via the "Fan Selection Assistant" on our website or contact our technical team directly.
Yes. As Helisfan, in addition to our standard catalog products, we produce custom fabrications with AISI 304, AISI 316 grade stainless steel, galvanized steel, and wear-resistant HARDOX impellers for high-corrosion risk facilities such as chemical, food, water treatment, or marine.
Our standard axial, duct-type, and livestock fans are readily available in stock. Custom-manufactured centrifugal fans, jet-pulse cartridge filter units, and dust suppression systems are delivered from our factory within an average of 5 to 15 business days following order and technical drawing approval.
All fans we manufacture carry a 2-year warranty on workmanship and parts. For our fans, which are balanced using dynamic balancing equipment at our factory, continuous spare parts support for impellers, belt-pulleys, anti-vibration mounts, and motors is provided directly from our Tuzla facilities.
Depending on the operating environment, we manufacture using DKP, galvanized and ST 37 carbon steel, AISI 304 / 316 stainless steel, HARDOX, and PVC materials. Impellers can be made of aluminum, stainless steel, or polyamide.
Direct-coupled fans require less maintenance and are compact; belt-driven systems allow speed adjustment after installation and are preferred for high-pressure, large-diameter fans. Our engineers will determine the drive suitable for your application.
Yes. Our axial blowers are manufactured in F300 / F400 classes in compliance with the EN 12101-3 standard, designed for smoke extraction in parking lots and enclosed areas.
Let's Choose the Right Fan for Your Project Together
Send us your flow rate, pressure, and ambient conditions; our engineers will provide the suitable model and factory price shortly.