Istanbul Leather Organized Industrial Zone, Tuşe Sokak No: 6 Tuzla / Istanbul
Mon - Fri: 08:30 - 18:30
Helisfan
AHP · HP · TG · TR TYPE RADIAL

Single Inlet Radial Fans

Radial fans are used in many fields, primarily general ventilation, as well as dust extraction, combustion air supply, baking ovens, fresh air supply, fire pressurization systems, and drying.

Flow Rate
100 - 200.000 m³/h
Pressure
100 - 20,000 Pa
Motor
0.18 - 132 kW
Speed
950 - 2.900 d/d
View Models
Single Inlet Radial Fans
Single Inlet Radial Fans
Single Inlet Radial Fans
Single Inlet Radial Fans
Single Inlet Radial Fans
Single Inlet Radial Fans
Single Inlet Radial Fans
ABOUT THE PRODUCT

What is a Radial Fan and Where Is It Used?

Radial (centrifugal) fans draw air from the center of the impeller, change its direction within the scroll casing, and discharge it through the outlet. Compared to other fan types, achieving the highest pressure values it is the fan type; therefore, it is preferred in long duct lines, filtered systems, and hood systems.

Main application areas general ventilation, dust extraction, combustion air supply, baking ovens, fresh air supply, fire pressurization systems, and drying. Helisfan radial fans 100 - 200.000 m³/h within flow rate and 100 - 20,000 Pa are manufactured within the pressure range.

AHP, HP, TG, and TR types

The e-catalog features 82 models across four types. AHP 8 models (1,360 - 1,450 rpm, 0.75 - 75 kW); HP 28 models at 950, 1,360 - 1,450, and 2,850 rpm speeds; TG 24 models at 1,450 and 2,750 - 2,900 rpm speeds; TR 22 models at 985 - 1,450 and 2,850 - 2,900 rpm speeds. Inlet diameter (DØ) is between Ø 130 mm and Ø 1,400 mm, and motor power is between 0.18 kW and 132 kW.

Position, drive, and material

The direction of the discharge outlet is selected from 16 positions in 45° increments when viewed from the drive side. The drive can be flanged coupled, belt-driven, direct coupled, or coupling connected; in heat-intensive applications, belt-driven types are used. In addition to carbon steel, it is also manufactured from aluminum, stainless steel, and acid-resistant PP material.

E-CATALOG DRAWINGS

Radial Fan Dimensional Drawings

Dimension letters are the same for all four types; values in the model table correspond to these drawings. All dimensions are given in mm.

AHP · HP TYPE · 36 MODELS

AHP and HP type dimensions

Front, side and bottom views. AHP 40 - 100, HP 33 - 140 sizes.

AHP and HP type radial fan front, side and bottom view dimensional drawing: A, B, C, DØ, E, F, G, H, K, L
TG · TR TYPE · 46 MODELS

TG and TR type dimensions

Front, side and bottom views. TG 22 - 112, TR 31 - 140 sizes.

TG and TR type radial fan front, side and bottom view dimensional drawing: A, B, C, DØ, E, F, G, H, K, L
POSITIONS

16 positions when viewed from the drive side

In GR and GL series, the outlet is in 8 positions with 45° steps. Specify the position code (e.g., GR 90) when requesting a quote.

Radial fan positions when viewed from the drive side: GR and GL 360, 45, 90, 135, 180, 225, 270, 315
DRIVE TYPES

Four drive types

Flange-coupled, belt-driven, direct-coupled and coupling-connected. Belt-driven is applied in high-temperature applications.

Radial fan drive types: flange-coupled, belt-driven, direct-coupled, coupling-connected
E-CATALOG MODEL TABLE

Single Inlet Radial Fans Models

Values are from the Helisfan E-Catalog; dimensions are in mm. You can request a quote directly from the row of the model that suits your needs.
Model Code ATotal width BTotal height CBase width DØInlet diameter ETotal depth FOutlet width GOutlet height HBase (bottom) KBase overhang LShaft height Speedd/d Motor PowerkW Flow Ratem³/dak PressuremmSS Quote
AHP Type
AHP 40 766 689 500 400 560 400 280 492 250 400 1360 0,75 40-110 56-15
AHP 50 961 865 630 500 710 500 355 617 315 500 1400 1,5 55-160 78-80
AHP 56 1076 969 710 560 800 560 400 691 355 560 1450 4 90-250 110-53
AHP 63 1206 1085 800 630 900 630 450 774 400 630 1450 7,5 125-350 150-72
AHP 71 1350 1215 900 710 1000 710 500 866 450 710 1450 15 180-560 180-63
AHP 80 1512 1361 1000 800 1120 800 560 970 500 800 1450 22 250-800 230-90
AHP 90 1694 1525 1120 900 1250 900 630 1087 560 900 1450 45 350-1120 300-110
AHP 100 1897 1708 1250 1000 1400 1000 710 1217 630 1000 1450 75 500-1600 365-140
HP Type — 1,360 - 1,450 rpm
HP 35 684 616 450 350 500 350 250 440 225 350 1360 0,37 20-60 41-17
HP 40 766 689 500 400 560 400 280 492 250 400 1360 0,55 22-90 50-20
HP 45 858 772 560 450 630 450 310 551 280 450 1390 1,1 45-125 70-32
HP 50 961 865 630 500 710 500 355 617 315 500 1400 2,2 63-180 86-40
HP 56 1076 969 710 560 800 560 400 691 355 560 1450 3 80-250 100-30
HP 63 1206 1085 800 630 900 630 450 774 400 630 1450 5,5 112-315 135-50
HP 71 1350 1215 900 710 1000 710 500 866 450 710 1450 11 160-450 165-75
HP 80 1512 1361 1000 800 1120 800 560 970 500 800 1450 18,5 220-630 215-90
HP 90 1694 1525 1120 900 1250 900 630 1087 560 900 1450 30 315-800 250-145
HP 100 1897 1708 1250 1000 1400 1000 710 1217 630 1000 1450 55 450-1250 330-130
HP Type — 2,850 rpm
HP 33 684 616 450 350 560 350 250 440 280 350 2850 2,2 40-90 165-80
HP 35 684 616 450 350 560 350 250 440 310 350 2850 3 45-125 185-100
HP 38 766 689 500 400 630 400 280 492 350 400 2850 4 50-160 210-90
HP 40 766 689 500 400 630 400 280 492 400 400 2850 5,5 60-200 230-70
HP 43 858 772 560 450 710 450 310 551 400 450 2850 7,5 80-225 270-130
HP 45 858 772 560 450 710 450 310 551 450 450 2850 11 90-280 300-100
HP 50 961 865 630 500 800 500 355 617 450 500 2850 15 112-315 350-150
HP 53 961 865 630 500 800 500 355 617 500 500 2850 18,5 125-400 380-120
HP Type — 950 rpm
HP 50 961 865 630 500 710 500 355 617 315 500 950 0,55 40-110 35-20
HP 56 1076 969 710 560 800 560 400 691 355 560 950 1,1 55-160 46-22
HP 63 1206 1085 800 630 900 630 450 774 400 630 950 2,2 80-200 65-40
HP 71 1350 1215 900 710 1000 710 500 866 450 710 950 4 112-350 80-35
HP 80 1512 1361 1000 800 1120 800 560 970 500 800 950 7,5 160-500 100-45
HP 90 1694 1525 1120 900 1250 900 630 1087 560 900 950 15 225-710 130-60
HP 100 1897 1708 1250 1000 1400 1000 710 1217 630 1000 950 22 315-1000 160-70
HP 112 2125 1913 1400 1120 1600 1120 800 1364 710 1120 950 37 500-1400 210-90
HP 125 2380 2142 1600 1250 1800 1250 900 1527 800 1250 950 75 710-1900 265-115
HP 140 2666 2399 1800 1400 2000 1400 1000 1711 900 1400 950 110 1000-2850 345-150
TG Type — 2,750 - 2,900 rpm
TG 22 434 392 280 130 400 140 100 350 200 225 2750 0,18 6-14 75-42
TG 25 487 438 315 185 430 200 140 350 225 250 2750 0,37 8-20 100-55
TG 28 545 491 350 205 430 225 165 392 225 280 2750 0,55 10-31 130-63
TG 30 610 491 350 225 430 250 180 392 225 280 2750 0,75 14-33 145-70
TG 31 610 550 400 225 430 250 180 392 225 310 2850 1,1 18-45 160-75
TG 33 684 616 450 255 490 285 200 440 250 350 2850 1,5 25-60 185-98
TG 35 684 616 450 255 525 285 200 440 285 350 2850 2,2 28-70 215-100
TG 38 766 689 500 285 560 315 225 492 285 400 2850 3 35-80 240-127
TG 40 766 689 500 285 580 315 225 492 315 400 2900 4 40-100 280-130
TG 43 858 772 560 315 645 350 250 551 350 450 2900 5,5 45-122 310-170
TG 46 858 772 560 315 645 350 250 551 350 450 2900 7,5 56-140 355-175
TG 50 961 865 630 355 835 400 285 617 500 500 2900 11 71-180 440-223
TG 53 1076 969 710 400 865 450 315 691 500 560 2900 15 90-250 480-200
TG 56 1076 969 710 400 865 450 315 691 500 560 2900 18,5 100-280 530-220
TG Type — 1,450 rpm
TG 63 1206 1085 800 450 850 500 350 774 450 630 1450 5,5 90-200 170-105
TG 71 1350 1215 900 500 900 560 400 866 450 710 1450 7,5 125-280 200-100
TG 75 1512 1361 1000 560 1000 630 450 970 500 800 1450 11 180-400 240-100
TG 80 1512 1361 1000 560 1000 630 450 970 500 800 1450 15 180-400 270-160
TG 85 1694 1525 1120 630 1110 710 500 1087 560 900 1450 22 250-560 300-170
TG 90 1694 1525 1120 630 1180 710 500 1087 630 900 1450 30 250-560 340-220
TG 95 1897 1708 1250 710 1320 800 560 1217 710 1000 1450 37 315-800 400-190
TG 100 1897 1708 1250 710 1320 800 560 1217 710 1000 1450 45 315-800 440-250
TG 110 2124 1912 1400 800 1480 1000 630 1364 800 1120 1450 75 450-1120 485-275
TG 112 2124 1912 1400 800 1450 1000 630 1364 800 1120 1450 90 450-1120 546-315
TR Type — 985 - 1.450 rpm
TR 63 1206 1085 800 500 850 500 350 774 450 630 1450 5,5 63-180 160-105
TR 71 1350 1215 900 560 900 560 400 866 450 710 1450 7,5 90-250 175-120
TR 75 1512 1361 1000 630 1000 630 450 970 500 800 1450 11 125-315 205-145
TR 80 1512 1361 1000 630 1000 630 450 970 500 800 1450 15 125-355 260-180
TR 85 1694 1525 1120 710 1110 710 500 1087 560 900 1450 22 180-450 310-230
TR 90 1694 1525 1120 710 1180 710 500 1087 630 900 1450 30 180-500 350-250
TR 95 1897 1708 1250 800 1320 800 560 1217 710 1000 1450 37 250-630 355-240
TR 100 1897 1708 1250 800 1320 800 560 1217 710 1000 1450 45 255-635 425-340
TR 110 2125 1913 1400 900 1480 900 630 1364 800 1120 1450 55 315-900 490-290
TR 112 2125 1913 1400 900 1480 900 630 1364 800 1120 1450 75 355-1000 550-365
TR 120 2380 2142 1600 1000 1660 1000 710 1527 900 1250 1450 110 400-1250 625-385
TR 125 2380 2142 1600 1000 1660 1000 710 1527 1000 1250 1450 132 400-1400 690-450
TR 140 2666 2399 1800 1120 1850 1120 800 1711 1000 1400 985 75 355-1400 385-245
TR Type — 2,850 - 2,900 rpm
TR 31 610 550 400 250 430 250 180 392 225 310 2850 1,1 14-45 150-100
TR 35 684 616 450 285 525 285 200 440 285 350 2850 2,2 22-60 210-145
TR 40 766 689 500 315 580 315 225 492 315 400 2900 4 28-90 265-180
TR 45 858 772 560 350 645 350 250 551 350 450 2900 7,5 40-125 340-250
TR 50 961 865 630 400 835 400 285 617 500 500 2900 11 56-160 420-325
TR 56 1076 969 710 450 865 450 315 691 560 560 2900 15 70-225 435-300
TR 58 1206 1085 800 500 900 500 350 774 630 560 2900 18,5 90-250 510-345
TR 60 1206 1085 900 500 1030 500 350 774 630 630 2900 30 125-315 660-406
TR 63 1206 1085 900 500 1030 500 350 774 630 630 2900 37 125-355 670-500

Technical datasheet (PDF) →

FREQUENTLY ASKED QUESTIONS

Questions About Single Inlet Radial Fans

The types are distinguished by size, speed, and power range. TG type starts from small sizes (Ø 130 mm inlet) and operates at high speeds; HP type is offered in three speeds between 950 rpm and 2,850 rpm; TR type goes up to 132 kW and 690 mmWC pressure. You can find the appropriate model based on airflow and pressure from the model table or Fan Selection Assistant.

They are manufactured from 100 m³/h up to 200,000 m³/h airflow, and from 100 Pa up to 20,000 Pa pressure.

The position is the direction of the discharge outlet when viewed from the drive (motor) side. There are 16 positions for GR and GL series, namely 360, 45, 90, 135, 180, 225, 270, and 315.

In heat-intensive applications, the motor is kept away from hot air, and belt-driven types are applied.

In addition to carbon steel, it is also manufactured from aluminum, stainless steel, and acid-resistant PP material.

QUICK FACTORY QUOTE

Let us help you choose the right fan for your project

Send us your flow rate, pressure, and ambient conditions; our engineers will provide the suitable model and factory price shortly.

WhatsApp Call Now