Istanbul Leather Organized Industrial Zone, Tuşe Sokak No: 6 Tuzla / Istanbul
Mon - Fri: 08:30 - 18:30
Helisfan
Fire Safety

F300 and F400 Class Fans in Fire Smoke Extraction

Rapid extraction of smoke in the event of a fire in parking lots and indoor areas is the basis of life safety. The fans used for this job must be able to withstand high temperatures for a certain period.

20 October 2026 1 min read

Products in this article Axial Fans
Axial Fans

EN 12101-3 standard

Smoke and heat exhaust fans EN 12101-3 are classified according to the standard. The class indicates the temperature and the duration for which the fan can continue to operate:

  • F300: Operation at 300 °C for at least 60 minutes
  • F400: Operation at 400 °C for at least 120 minutes

The required class is determined by the project designer based on the building type, fire scenario, and relevant regulations.

Where is it used?

  • Closed parking lots and jet fan systems
  • Stairwell and elevator shaft pressurization
  • Shopping malls, warehouses, and industrial buildings

Helisfan axial fans

Our axial fans are used in general ventilation, fresh air supply, and fire pressurization applications; manufactured with flow rates ranging from 300 to 500,000 m³/h and pressure ranges from 50 to 2,000 Pa, with belt-drive or direct-drive options, and ST 37, stainless steel, Hardox, and PVC casings.

If your project requires an F300 or F400 class fan for smoke extraction, please specify this in your request so we can evaluate your needs and the required documentation together.

Frequently asked questions

No. For smoke extraction, only fans classified according to EN 12101-3 with high temperature-resistant motors and casings must be used.

← Technical Information
WhatsApp Call Now